Create NTFS bootable USB / Flash Drive

Before starting, some things must be downloaded first, and others you need to have available:
But first thing first... if not already done, (thanks Henk for bringing up this issue), we will enable hidden/system files viewing first.a.. In Windows Explorer go to the "Tools" menu
b.. Click on "Folder Options..."
c.. Go to the "View" tab
d.. Enable the "Display simple folder view in Explorer's Folders list" checkbox
e.. Enable the "Display the contents of system folders" checkbox
f.. Choose the "Show hidden files and folders" ratio button
g.. Uncheck the "Hide extensions for known file types" checkbox
h.. Uncheck the "Hide protected operating system files (Recommended)" checkbox, and click "Yes" on the popup.
i.. Hit the "OK" button on the "View" tab

Next we are going to start with the downloading of...      -    pebuilder3110a

-         Pe2usb

-         HP USB Disk Storage Format Tool

-         Network Drivers….

-         Windows Service pack 1 for Windows 2003 server. (we only need 2 files from this service pack. Instead you Can use 2003 server CD also)

-         Windows XP installation CD 

-         A USB key of at least 256MB, also here, bigger is better...

Step 1: Extracting

-         Extract PEBuilder (pebuilder3110a.zip) into a location and folder of your choice.

-         Next is to extract pe2usb (pe2usb101.zip). The 3 extracted files have to be placed in the folder you have used/created to extract PEBuilder to.

-         Install HP USB Disk Storage Format Tool (SP27213.exe) to a location of your choice.

-         now we are going to extract our Service pack 1 for Windows 2003 server. You only need 2 files. To do so, you do the following:

Open a Dos window. To do so click on “Start” – “Run” – and type the following:
CMD and click on OK.

In the dos window you have to go to the location where you have your service pack previously saved after the download. Here in this example one would go to c:\temp and give in the name of the service pack followed by a “-X” (without the quotation marks). Now the service pack will be extracted...you decide the location



After the extraction you can close this dos window...
Next is to search for the 2 files needed in the extraction folder...”setupldr.bin” and “ramdisk.sy_” Both are in the i386 folder and need to be copied to the PEBuilder folder as well.



This ramdisk.sy_  file still has be worked with.Therefore we will open up again a dos window.
In this example we give in the following:

We now will create a new folder in the PEBuilder folder. This new folder will be given the following name: srsp1
and you have to copy the files ”setupldr.bin” and “ramdisk.sys” from the PEBuilder folder into that newly created folder.
Step 2: Starting Pebuilder
For adding Plugins, I would like to point you to the following websites: Bart PEBuilder,  The 911.net CD Forum and my own site  .

Once the .iso file has been created, you can close PEBuilder...


Step 3: The USB-key
Fisrt step here is to format the USB key. REMINDER!!!! all data will be deleted on the USB-key...
To format the USB-key, we will use HPUSBFW.exe (HP USB Disk Storage Format Tool), which we downloaded installed in the beginning of this document...
Best thing to do, is to leave the file system on the USB-key to FAT...

After the format we are going to do the transfer to the USB-key.. We are now going to use pe2usb. To do so open a dos window.
We now go through the dos window to the PEBuilder folder and type in the following command:pe2usb X: (where X is the drive letter of your USB-key. In this example it would be G: ) and hit Enter

The size of the iso files depends on the number and size of plugins you have added or activated...

If you take a look on the USB-key you should at least have the following files:
an .iso file  –  NTDETECT.COM  –  ntldr  and  winnt.sif You could also copy some extra files onto the USB-key, which can be run without any installation. (stand allone applications)...these apps can be found anywhere...a few examples you can already find on my site: here and here.

The very last step of course is to tell youre computer it should boot from USB. This can be done through the BIOS of the computer. Because of the different versions and makings of BIOS, I would refer here to your manual on the BIOS youre computer is using, to take the necessary steps...
Once all necessary steps are taken, and if you computer is fit to boot from USB, it should normally boot from the USB-key.
 If you recieve an Error 16 during the startup, it is most likely you do not have enough memory in your computer to unpack the iso file. If so you can eiter add extra memory or you make your ISO smaller by reducing the plugins used while creating with PEBUILDER.